Focusight Cosmetics Paper Packaging Quality Control and Surface Detection Equipment
COSMETIC, ELECTRONICS AND FOOD BOX HIGH SPEED QUALITY INSPECTION MACHINE FS-GECKO-500
Product Type - FS-GECKO-500-P3N1
Product Description
What: The Focusight Inspection Machine will precisely find out the defects of printing on presswork and reject the bad ones from the good ones automatically.
How: The Focusight cameras scan some good presswork as “STANDARD” and then while the rest of the printed jobs are inspected be scanned one by one and compared with the “STANDARD”, any mal-printed or defective ones will be rejected automatically by the system. It detects every type of printing or finishing fault – color misregistration, color variations, hazing, misprints, defect in the text, spots, splashes, varnishing missing & misregistration, embossment missing & misregistration, laminating problems, die-cut problems, barcode problems, Holographic Stripe, cure & cast and many other printing problems.
Object of Inspection - Form 1: the kind of Detectable Objects on Cosmetic Blanks
Note : ( ★ Detectable; ☆ Partially Detectable; △ Undetectable )
| Product Type | FS-500-GECKO P2 | FS-500-GECKO P2N1 | FS-500-GECKO P3 | FS-500-GECKO P3N1 |
| Applicable Presswork | FBB, SBS paperboard, Offset paperboard, Coated free sheet paper, Gold or Silver coated paperboard, Laser paperboard |
| Regular Printing | ★ | ★ | ★ | ★ |
| Die Cutting Misregistration | ★ | ★ | ★ | ★ |
| Foil Stamping | ★ | ★ | ★ | ★ |
| Holographic Stripe | ★ | ★ | ★ | ★ |
| Cast and Cure | △ | △ | ★ | ★ |
| Laminating | ☆ | ☆ | ★ | ★ |
| Vanishing Misregistration | ☆ | ☆ | ★ | ★ |
| Vanishing Missing / Scratch | ☆ | ☆ | ★ | ★ |
| Embossing Mis registration | ★ | ★ | ★ | ★ |
| Some Silkscreen | ☆ | ★ | ★ | ★ |
| Scratch | ☆ | ☆ | ★ | ★ |
| Reverse Side | △ | ★ | △ | ★ |
| Some Variable Bar Code and QR Code | ★ | ★ | ★ | ★ |
Technical Parameter
Form 2: Performance Parameters of Inspection System
| Product Type | FS-GECKO-500 P2 | FS-GECKO-500 P2N1 | FS-GECKO-500 P3 | FS-GECKO-500 P3N1 |
| Inspection FOV | 500mm (Width) |
| Imaging Resolution (mm) | Front Imaging Resolution (Regular Printing Side): 0.12mm * 0.12mm Front Imaging Resolution (Laminating & Embossing Side): 0.06mm * 0.12mm Front Imaging Resolution (Silkscreen & Vanishing Side): 0.06mm * 0.12mm Reverse Imaging Resolution: 0.12mm * 0.2mm |
| Variable Bar Code | - Code Reading: Wrong Code and Repeated Code; The height of Code should be not less than 28mm
- Series Number: Wrong Number and Repeated Number
- Appearance: Spot, Break Line, Set Off, Ink Pick, etc
- White and Black Line: The Line with 0.1mm width, 5mm length could be detected
|
| When the defect contrast is over grade 40 | 1. Minimum Inspection Area of Regular Defects, such as Printing Missing, Dirty Spot and stuff like that: ≥0.15 mm2 2. Minimum Inspection Area of Foil Stamping Defects:≥0.2mm2 3. Print Misregistration Inspection: ≥0.2mm 4. Die Cutting Misregistration Inspection: ≥0.2mm 5. Gravure Blade Streak: vertical stripes with width over 0.1mm, and contrast over grade 20 are detectable 6. Local Color Difference Inspection ΔE≥3 |
Form 3: Performance Parameters of Transportation Platform
| Item | Parameter |
| Max. Transportation Speed | 180m/min |
| Max. Inspection Speed | 140m/min |
| Max. Sheet Dimension (W*L) | 480mm×400mm |
| Min. Sheet Dimension (W*L) | 120mm×120mm suction feeder 100*100 friction feeder |
| Suggested Gram Weight | 150～400g/㎡ |
| Total Mechanical Platform Dimension (L*W*H) | 6880mm×3400mm×2240mm |
| Powel | 15kw |
| Total Weight | 4 Tons |
Commercial Part
- Delivery Time
- The time of delivery to Shanghai Port shall be 80 days after receipt of down payment and technical approval both, which may be postponed accordingly due to the late payment, or delay of technical approval, or any amendment caused by the Buyer.
- Installation
- Installation of the machine will be done by our engineers (one mechanical engineer and one software engineer). Installation and training is free of charge and the whole period is about 16 working days.
- Customer is also responsible for hotel accommodation (3 star hotel), meals and local transportation for engineers.
- Warranty
- There is 1 year warranty (from the date of installation) on all parts, mechanical, electrical and software due to defect in manufacturing, except for consumable parts such as belts, rubber sucker, etc and if “accident” or mal-operation has occurred.
Pictures At Glance:
Product Tags:
|
|
Cosmetics Paper Packaging Surface Detection Equipment / Quality Control Machine Images
|
